Pillow Block Housing Unit UCPA210 - Shaft: 50 mm
Item number: UCPA210
Item features:
The pillow block bearing UCPA210 is suitable for high radial loads and is particularly robust with its gray cast iron housing.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 50 |
Tolerance for inside-Ø (mm): | 0,021/0 |
Housing Type: | Plummer block bearing |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 2 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | Cast Iron |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Fixing Thread in the Housing: | M16 |
Recommended tightening torque for shaft fastener (Nm): | 22 |
Bearing No.: | UC 210 |
Housing No.: | PA 210 |
Grub Screw: | M10 |
Grease Nipples: | Straight Type A (180°) |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 626-2 |
Item weight: | 2,44 kg |
Features
- consisting of a ball bearing insert UC 210 and a cast iron housing PA 210
- suitable for mounting on flat surfaces and high radial load capacities
- the housing is made of cast iron and therefore inexpensive and robust
- the bearing insert has an extended inner ring with grub screws
- The pillow block bearing is mounted on the shaft with two grub screws
- smooth running and good behavior with tilting due to the extended inner ring
- static misalignments can be compensated up to an angle of 2°
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions relubrication is not required
- housing with integrated lubrication hole
- to protect against corrosion, the housing is painted; the bearing insert and the mounting surface are treated with corrosion protection oil
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.