Englisch
Deutsch
Needle Roller / Axial Ball Bearings NX10 10x19x18 mm
Item number: NX10
Item features:
The combined needle roller bearing NX10 combines the benefits of a radial needle roller bearing with those of a full complement axial deep groove ball bearing and carries high radial loads and axial loads in one direction. It has no inner ring and requires therefore a particularly small radial installation space.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 19 |
| Width (mm): | 18 |
| Tolerance for inside-Ø (mm): | 0,047/0,025 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,25 |
| Seal: | open |
| Cage Material: | Sheet Steel |
| Magnetic: | yes |
| Norm: | DIN 5429-1 |
| Ring Material: | Rolling Bearing Steel |
| Type of lubrication: | oiled |
| max. Operating Temperature: | +150°C |
| Rolling Element Material: | Rolling Bearing Steel |
| min. Operating Temperature: | -40°C |
| Item weight: | 21 g |
Features
- combination of a radial needle roller bearing and full complement axial deep groove ball bearing
- suitable for high radial loads and axial loads in one direction
- space-saving due to low radial section height
- separable
- without end cap, for oil lubrication
- condition for the use is a hardened and ground shaft; if the shaft is not usable as raceway, a combination with an inner ring is possible
- with circumferential groove and lubrication holes in the outer ring
- material: chrome steel (100Cr6)
- temperature resistance: from approx. –20 °C up to +120 °C