Needle Roller / Axial Ball Bearings NKX35 35x47x30 mm
Item number: NKX35
Item features:
The combined needle roller bearing NKX35 combines the benefits of a radial needle roller bearing with those of an axial deep groove ball bearing and carries high radial loads and relatively high axial loads in one direction. It has no inner ring and requires therefore a particularly small radial installation space. The main dimensions correspond to DIN 5429 (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 35 |
Outside Ø (mm): | 47 |
Width (mm): | 30 |
Tolerance for inside-Ø (mm): | 0,089/0,05 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,25 |
Seal: | open |
Cage Material: | Sheet Steel |
Magnetic: | yes |
Norm: | DIN 5429-1 |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | oiled |
max. Operating Temperature: | +150°C |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -40°C |
Item weight: | 0,16 kg |
Features
- combination of a radial needle roller bearing and an axial deep groove ball bearing
- suitable for high radial loads and relatively high axial loads in one direction
- space-saving due to low radial section height
- separable
- without end cap, for oil lubrication
- condition for the use is a hardened and ground shaft; if the shaft is not usable as raceway, a combination with an inner ring is possible
- with circumferential groove and lubrication holes in the outer ring
- material: chrome steel (100Cr6)