Needle Roller / Axial Ball Bearings NKX10 TN 10x19x23 mm
Item number:
NKX10-TN
Item features:
The combined needle roller bearing NKX10-TN combines the benefits of a radial needle roller bearing with those of an axial deep groove ball bearing and carries high radial loads and relatively high axial loads in one direction. It has no inner ring and requires therefore a particularly small radial installation space. The main dimensions correspond to DIN 5429 (DIN = German industrial norm).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 10 |
Outside Ø (mm): | 19 |
Width (mm): | 23 |
Tolerance for inside-Ø (mm): | 0,047/0,025 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,25 |
Seal: | open |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Plastic |
Type of lubrication: | oiled |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | DIN 5429-1 |
Item weight: | 34 g |
Features
- combination of a radial needle roller bearing and an axial deep groove ball bearing
- suitable for high radial loads and relatively high axial loads in one direction
- space-saving due to low radial section height
- separable
- without end cap, for oil lubrication
- condition for the use is a hardened and ground shaft; if the shaft is not usable as raceway, a combination with an inner ring is possible
- with circumferential groove and lubrication holes in the outer ring
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- material: chrome steel (100Cr6)