Miniature Self Aligning Ball Bearing 126 TN 6x19x6 mm
Item number:
126-TN
Item features:
For use in special conditions. The miniature self-aligning ball bearing 126-TN is small and suitable for installation with limited space and on thin shafts. It offers excellent alignment error compensation and can withstand high speeds. Main dimensions according to DIN 630.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 6 |
Outside Ø (mm): | 19 |
Width (mm): | 6 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,009 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Seal: | open |
Sealing material: | without |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Plastic |
Type of lubrication: | oiled |
Lifetime lubricated: | no |
Internal Clearance: | CN (Standard) |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +100°C (briefly up to +150°C) |
min. Operating Temperature: | -40°C |
Permissible angular misalignment: | 3° |
Magnetic: | yes |
Norm: | DIN 630 |
Item weight: | 19 g |
Features
- miniature ball bearing with smallest dimensions
- self-aligning ball bearing with two rows of balls
- pivoting inner ring, misalignments and shaft deflections can be compensated
- suitable for high radial loads and light axial loads in both directions
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)