Miniature Deep Groove Ball Bearing 695 2RS 5x13x4 mm

    Item number: 695-2RS

Item features:
For use in special conditions. The miniature ball bearing 695-2RS is small and suitable for installation with limited space and on thin shafts. Main dimensions according to DIN 625-1.
Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 0,83 €*
10 0,79 €*
50 0,74 €*
200 0,70 €*
1000 0,68 €*
1,05 €
incl. 19% VAT , plus shipping charge
pcs
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme

Technical ScribbleZoomable

Technical Data

Inside Ø (mm): 5
Outside Ø (mm): 13
Width (mm): 4
Tolerance for inside-Ø (mm): 0/-0,008
Tolerance for outside-Ø (mm): 0/-0,008
Tolerance for width (mm): 0/-0,12
Bore: cylindrical
Extended Inner Ring: no
max. Operating Temperature: +100°C (briefly up to +120°C)
min. Operating Temperature: -20°C
Tolerance Class: ABEC 1 / P0
Internal Clearance: CN (Standard)
Seal: 2RS
Ring Material: Rolling Bearing Steel
Rolling Element Material: Rolling Bearing Steel
Cage Material: Sheet Steel
Sealing material: NBR
Seal Colour: Black
Type of lubrication: greased
Lifetime lubricated: yes
Magnetic: yes
Noise and vibration testing: Class V
Norm: DIN 625-1
Item weight: 2,5 g

Features

  • miniature ball bearing with smallest dimensions
  • suitable for high radial loads and light axial loads in both directions
  • suitable for high running accuracy and quiet running
  • seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
  • If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
  • good fixed bearing property, but can also be used as a floating bearing, each in both directions
  • manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Further Information

Customer Ratings

5/5

Average item rating

Write a review

5 Customer Ratings Total

4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Für mein Tamiya DB-01RRR Umbau
5 from 5
Für mein Tamiya DB-01RRR Umbau

Ideal dieses Kugellager war perfekt. Und es wurde schnell geliefert. Einfach Super

Jederzeit wieder.
5 from 5
Jederzeit wieder.

Sehr schnelle Lieferung. Richtiges Teil. Jederzeit wieder.

Bewertung
5 from 5
Bewertung

perfekt

Miniatur Kugellager 695 2RS 5x13x4 mm
5 from 5
Miniatur Kugellager 695 2RS 5x13x4 mm

Sehr schnelle Lieferung Alles Prima

Bewertung
5 from 5
Bewertung

Bin sehr zufrieden, gerne wieder!

Category: Ball Bearings
  • Delivery time: Available

From Unit price / pcs
4 0,83 €*
10 0,79 €*
50 0,74 €*
200 0,70 €*
1000 0,68 €*
1,05 €
incl. 19% VAT , plus shipping charge
pcs
Secure Shopping
Sofort Überweisung Rechnung Kreditkarte Lastschrift Nachnahme