Miniature Axial Deep Groove Ball Bearings of the series SSF (Stainless Steel)

Special feature of this series: Stainless steel miniature axial deep groove ball bearings of the series F are corrosion resistant and suitable for particularly small shaft diameters from 2 to 10 millimeters. They are dismountable and are suitable for higher numbers of revolutions than the larger bearings of the series 511 and 512.

Datatable

Items 1 - 2 of 2

Reset all filters

Image may differ.

Stainless Steel Miniature Axial Deep Groove Ball Bearing SS F10-18M 10x18x5.5 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,09 €
from 10 pcs per 3,87 €
from 50 pcs per 3,64 €
from 200 pcs per 3,05 €
from 1000 pcs per 2,95 €

4,55 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

Stainless Steel Miniature Axial Deep Groove Ball Bearing SS2 F10-18M 10x18x5.5 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,83 €
from 10 pcs per 4,57 €
from 50 pcs per 4,30 €
from 200 pcs per 3,59 €
from 1000 pcs per 3,49 €

5,37 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 2 of 2

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.