Englisch
Deutsch
Miniature Axial Deep Groove Ball Bearing F8-14M-M 8x14x4 mm
Item number:
F8-14M-M
Item features:
For use in special conditions. The miniature thrust bearing F8-14M-M is small and suitable for installations with limited space and on thin shafts. It absorbs loads from an axial direction and can be dismantled.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 8 |
| Outside Ø (mm): | 14 |
| Width (mm): | 4 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0,02/-0,25 |
| Outside Ø Housing Washer (mm): | 14 |
| Outside Ø Shaft Washer (mm): | 13.8 |
| Inside Ø Housing Washer (mm): | 8.2 |
| Inside Ø Shaft Washer (mm): | 8 |
| Cage Material: | Sheet Brass |
| Lifetime lubricated: | no |
| Magnetic: | yes |
| Ring Material: | Rolling Bearing Steel |
| Type of lubrication: | oiled |
| Tolerance Class: | ABEC 1 / P0 |
| max. Operating Temperature: | +150°C |
| Rolling Element Material: | Rolling Bearing Steel |
| min. Operating Temperature: | -40°C |
| Item weight: | 3 g |
Features
- miniature thrust bearing series
- consists of a shaft washer, a spherical housing washer and a ball cage assembly
- suitable for particularly small shaft diameters
- suitable for very high speeds
- cage material: brass, high load-bearing capacity and high strength; suitable for continuous high temperatures
- can be dismantled, the bearing washers and the ball cage assembly can be mounted separately
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)