Miniature Axial Deep Groove Ball Bearing F7-13M-M 7x13x4.5 mm
Item number:
F7-13M-M
Item features:
For use in special conditions. The miniature thrust bearing F7-13M-M is small and suitable for installations with limited space and on thin shafts. It absorbs loads from an axial direction and can be dismantled.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 7 |
Outside Ø (mm): | 13 |
Width (mm): | 4.5 |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Bore: | cylindrical |
Extended Inner Ring: | no |
Tolerance Class: | ABEC 1 / P0 |
Magnetic: | yes |
Type of lubrication: | oiled |
Cage Material: | Sheet Brass |
Lifetime lubricated: | no |
min. Operating Temperature: | -40°C |
Tolerance for width (mm): | 0,02/-0,25 |
max. Operating Temperature: | +150°C |
Outside Ø Housing Washer (mm): | 13 |
Outside Ø Shaft Washer (mm): | 12.8 |
Inside Ø Shaft Washer (mm): | 7 |
Inside Ø Housing Washer (mm): | 7.2 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Item weight: | 2,6 g |
Features
- miniature thrust bearing series
- consists of a shaft washer, a spherical housing washer and a ball cage assembly
- suitable for particularly small shaft diameters
- suitable for very high speeds
- cage material: brass, high load-bearing capacity and high strength; suitable for continuous high temperatures
- can be dismantled, the bearing washers and the ball cage assembly can be mounted separately
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)