Magneto Ball Bearing E13 / EN13 13x30x7 mm
Item number: E13
Item features:
Specialist for special requirements. The magneto ball bearing E13 has only one shoulder and can be disassembled. Therefore, it is particularly easy to assemble. It can withstand high speeds. Main dimensions according to DIN 615.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 13 |
Outside Ø (mm): | 30 |
Width (mm): | 7 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0,009/0 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Sealing material: | without |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Brass |
Type of lubrication: | oiled |
Lifetime lubricated: | no |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +150°C |
min. Operating Temperature: | -40°C |
Magnetic: | yes |
Norm: | DIN 615 |
Item weight: | 26 g |
Features
- similar in construction to a deep groove ball bearing - the outer ring has just one shoulder, so the inner ring and the cage can be fitted separately from the outer ring
- often mounted in pairs, opposite each other and primary used for small instruments or domestic appliances
- suitable for light radial and axial loads in one direction
- suitable for high running accuracy, quiet running and high speeds
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.