Englisch
Deutsch
High Precision Miniature Ball Bearing MF 106 ZZ / 2Z CN V2 P6 GS1 6x10x3 mm
Item number:
MF-106-ZZ-CN-V2-P6-GS1
Item features:
For use in special conditions. The precision miniature ball bearing MF-106-ZZ / 2Z-CN-V2-P6-GS1 is small and suitable for installation with limited space and on thin shafts. With the flange, it can be fixed axially, e.g. in bore holes. It can withstand very high speeds.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 6 |
| Outside Ø (mm): | 10 |
| Flange Ø (mm): | 11.2 |
| Flange Width (mm): | 0.6 |
| Width (mm): | 3 |
| Tolerance for inside-Ø (mm): | 0/-0,007 |
| Tolerance for outside-Ø (mm): | 0/-0,007 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | ZZ |
| Sealing material: | Sheet Steel |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lubrication: | Multemp SRL |
| Lifetime lubricated: | yes |
| Application: | Electric motors |
| Internal Clearance: | CN (Standard) |
| Tolerance Class: | ABEC 3 / P6 |
| Noise and vibration testing: | Class V2 |
| Vibration Class: | V2 |
| max. Operating Temperature: | +120°C |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 1 g |
Features
- the flange on the outer ring prevents axial displacements
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy, quiet running and very high speeds
- seal: non-contact gap seal on both sides made of a profiled sheet steel disc (ZZ / 2Z) for higher speeds than with rubber seal
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
- tolerance class: P6 - high dimensional, form and running accuracy
- vibration class: V2 - lower tolerances with regard to occurring vibrations during operation
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Are bearings made of stainless steel 100 per cent corrosion-resistant?
- Can bearings made of stainless steel be magnetic?
- Informations about lubricant SRL
- How do I remove a sealing washer or cover plate?