High Precision Deep Groove Ball Bearings SS-69-V (Stainless Steel - Full Complement Ball Set)

Features of this series: Main dimensions according to DIN 625-1. The SS-69-V series of high precision, stainless steel thin section bearings feature a full complement, cageless design that allows a greater number of rolling elements to be used, thereby increasing load carrying capacity. These bearings are manufactured to tight production tolerances, resulting in improved accuracy and smoothness.; They have considerably smaller dimensions than deep groove ball bearings of the 60, 62, 63 and 64 series with their thincross section at the same inside diameter. In comparison to their inside diameter they have a small outside diameter - and furthermore - they are relatively narrow. Relatively high shaft- and axis diameters can thereby be installed at an confined installation space. They also have good corrosion resistance due to the use of stainless steel.

Full Complement High Precision Deep Groove Ball Bearing...

Image may differ.

Full Complement High Precision Deep Groove Ball Bearing SS2 6901 V (MAX) 2RS P6 GP 12x24x6 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,20 €
from 10 pcs per 9,34 €
from 50 pcs per 8,62 €
from 200 pcs per 8,13 €
from 500 pcs per 7,65 €

12,14 € *

incl. 19% VAT , plus

Image may differ.

Full Complement High Precision Deep Groove Ball Bearing SS2 6903 V (MAX) 2RS P6 GP 17x30x7 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 13,79 €
from 10 pcs per 12,65 €
from 50 pcs per 11,66 €
from 200 pcs per 11,01 €
from 500 pcs per 10,34 €

16,42 € *

incl. 19% VAT , plus

Items 1 - 2 of 2

FILTER

Reset all filters

Geometric structure of the ball bearing

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

An extended inner ring is wider than the outer ring of the article.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Some materials used for rolling bearings are magnetic.

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Lubricant used in a rolling bearing

These bearings are lubricated for the expected service life and do not require relubrication.

Area in which the rolling bearing is used