High Precision Deep Groove Ball Bearings of the series 60

Special feature of this series: Precision deep groove ball bearings of the extra-light series 60 are made to tighter tolerances than regular deep groove ball bearings. Compared to precision deep groove ball bearings of the 63 medium series they require a smaller installation space at the same inside diameter, only weigh half of them and allow higher speeds. They can still support moderate radial loads despite their low weight.

Datatable

Items 1 - 5 of 5

Reset all filters

Image may differ.

High Precision Deep Groove Ball Bearing 6004 C2 P5 open oil 20x42x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,80 €
from 10 pcs per 3,52 €
from 50 pcs per 3,36 €
from 200 pcs per 3,25 €
from 1000 pcs per 3,14 €

5,41 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

High Precision Deep Groove Ball Bearing 6005 C2 P5 open oil 25x47x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 4,32 €
from 10 pcs per 4,01 €
from 50 pcs per 3,83 €
from 200 pcs per 3,70 €
from 1000 pcs per 3,57 €

6,17 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

High Precision Deep Groove Ball Bearing 6006 C2 P5 open oil 30x55x13 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 5,18 €
from 10 pcs per 4,81 €
from 50 pcs per 4,59 €
from 200 pcs per 4,45 €
from 1000 pcs per 4,30 €

7,40 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

High Precision Deep Groove Ball Bearing 6007 C2 P5 open oil 35x62x14 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 7,84 €
from 10 pcs per 7,35 €
from 50 pcs per 6,87 €
from 200 pcs per 6,57 €
from 1000 pcs per 6,38 €

9,81 € *

incl. 19% VAT , plus (Briefversand)

Image may differ.

High Precision Deep Groove Ball Bearing 6008 C2 P5 open oil 40x68x15 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 9,82 €
from 10 pcs per 9,20 €
from 50 pcs per 8,60 €
from 200 pcs per 8,22 €
from 1000 pcs per 7,98 €

12,27 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 5 of 5

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used

Some materials used for rolling bearings are magnetic.