Full Complement Stainless Steel Deep Groove Ball Bearing for low speeds SS 6002 V (MAX) 2RS L GD1 15x32x9 mm
Item number:
SS-6002-V-2RS-L-GD1
Item features:
Lightweight, stable and resilient. The full complement stainless steel deep groove ball bearing SS-6002-2RS-L-GD1 is a true all-rounder, suitable for a wide range of applications due to its balanced properties and is resistant to corrosion. Main dimensions according to DIN 625-1. With its full complement ball set design, it is particularly suitable for heavy loads. Due to the maximum number of rolling elements, it is marked with the addition MAX (= maximum).
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 15 |
Outside Ø (mm): | 32 |
Width (mm): | 9 |
Bore: | cylindrical |
Extended Inner Ring: | no |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Application: | Bicycle |
Seal: | 2RS |
Seal Colour: | Blue |
Sealing material: | NBR |
Noise and vibration testing: | Class V |
Cage Material: | none |
Internal Clearance: | C3 (increased clearance) |
Lifetime lubricated: | yes |
Magnetic: | yes |
Norm: | DIN 625-1 |
Ring Material: | Stainless Steel |
Type of lubrication: | greased |
Lubrication: | Mobilgrease XHP™ 222 |
Tolerance Class: | ABEC 1 / P0 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Stainless Steel |
min. Operating Temperature: | -40°C |
Item weight: | 30 g |
Features
- all components are made of stainless steel: the deep groove ball bearing is therefore corrosion resistant and hygienic
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- offers quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- full complement ball system design: higher radial load capacity than comparable deep groove ball bearings with cage
- high impact resistance and rigidity due to larger number of rolling elements
- a typical application is with the MTB swing arm
- is suitable for lower speeds than SS-6002-V-2RS
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?