Englisch
Deutsch
Full Complement Ball Set Deep Groove Ball Bearing 63800 V (MAX) 2RS GP 10x19x7 mm
Item number:
63800-V-2RS-GP
Item features:
The deep groove ball bearing 63800-V-2RS-GP is the wider version of the full complement 68-V series. It is narrow and can also be used with limited space. Due to the maximum number of rolling elements, it is marked with the addition MAX (= maximum). Main dimensions according to DIN 625-1.
Technical Scribble
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 19 |
| Width (mm): | 7 |
| Static radial load rating (N): | 840 |
| Dynamic radial load rating (N): | 1720 |
| Limiting speed (1/min): | 31725 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -40°C |
| Tolerance for inside Ø (mm): | 0/-0,008 |
| Tolerance for outside Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Tolerance Class: | ABEC 1 / P0 |
| Internal Clearance: | CN (Standard) |
| Noise and vibration testing: | Class V |
| Seal: | 2RS |
| Seal Colour: | Black |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | none |
| Sealing material: | NBR |
| Type of lubrication: | greased |
| Lubrication: | Grease for high mechanical loads |
| Lifetime lubricated: | yes |
| Application: | Bicycle |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 7 g |
Features
- full complement ball system design: higher radial load capacity than comparable deep groove ball bearings with cage
- high impact resistance and rigidity due to larger number of rolling elements
- wider than comparable deep groove ball bearings of the series 68
- thin section bearing with very thin, rectangular cross section
- suitable for space-saving installation in radial and axial directions
- suitable for very high speeds compared to deep groove ball bearings with a larger cross section
- extra light series with compact dimensions and low weight
- suitable for radial loads and light axial loads in both directions
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- Differences between cage-guided and full-complement deep groove ball bearings
- How do I remove a sealing washer or cover plate?
Manufacturer information
Quasi-ManufacturerKugellager-Express GmbH
Grenzweg 14a
33758 Schloß Holte-Stukenbrock
Germany