Miniature Flanged Ball Bearing F 687 W3.5 open / F687 W3.5 open oiled 7x14x3.5 mm

Item number: F-687-W3.5-OIL

Rate now
For use in special conditions. The miniature ball bearing F-687-W3.5 is small and suitable for installation with limited space and on thin shafts. With the flange, it can be fixed axially, e.g. in bore holes. It can withstand very high speeds. It has metric special dimensions.

Category: Miniature Flanged Ball Bearings F MF

Shipping time: Available

From pcsPrice per unit
42,27 €
102,15 €
502,03 €
2001,92 €
10001,80 €
2,39 €

including 19% VAT., plus shipping charge

Free shipment from 50 Euros
(inside of Germany)

Technical ScribbleZoomable

Technical Data

Inside Diameter (mm):7
Outside Diameter (mm):14
Width (mm):3.5
Flange Diameter (mm):16
Flange Width (mm):1.1
Rows Of Balls:single row
Cage Material:Sheet Steel
Internal Clearance:CN (Standard)
Slot & Snap Ring:no
Ring Material:Chrome Steel
Full Complement Ball Set:no
Rolling Element Material:Chrome Steel
Product weight: 0,002 Kg


  • the flange on the outer ring prevents axial displacements
  • miniature ball bearing with smallest dimensions
  • suitable for high radial loads and light axial loads in both directions
  • suitable for high running accuracy, quiet running and very high speeds
  • seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
  • good fixed bearing property, but can also be used as a floating bearing, each in both directions
  • manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)

Further Information


Average product review

Write your first review and help others with their purchase decision:

Review product