Flange Housing Unit UKPFL206 as a Set Comprising Bearing Insert UK206, Adapter Sleeve H2306 and Flange Housing PFL206 - Shaft: 25 mm
Item number:
UKPFL206-Set
Item features:
The housing bearing unit UKPFL206 as a set includes the 2-hole flange housing PFL206, the single row radial insert ball bearing UK206 (shaft: 25 mm) and the adapter sleeve H2306. The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads, alternating directions of rotation and high speeds. With its sheet steel housing it is suitable for space-saving installations.
Set Components
Technical Data
Inside Ø (mm): | 25 |
Housing Type: | 2 hole flanged housing unit |
Extended Inner Ring: | no |
Number of Mounting Holes: | 2 |
Bore-Ø (mm): | 30 |
Seal: | 2-peace sealing system |
Recommended tightening torque for shaft fastener (Nm): | 30 |
Housing Material: | galvanized Sheet Steel |
Housing No.: | PFL 206 |
Cage Material: | Sheet Steel |
Bearing No.: | UK 206 |
Lifetime lubricated: | yes |
Magnetic: | yes |
Ring Material: | Rolling Bearing Steel |
Type of lubrication: | greased |
Shaft Fastening: | Adapter Sleeve |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Rolling Element Material: | Rolling Bearing Steel |
min. Operating Temperature: | -20°C |
Item weight: | 0,50 kg |
Features
Flange housing
- the design as a 2-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- low weight
- with conical bore for fixing the inner ring by means of adapter sleeves on a shaft
- suitable for changing directions of rotation
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
- consists of a tapered metal sleeve, a tab washer and a locknut
- Upon fixing a bearing with the help of an adapter sleeve the inner ring of the bearing takes over the function of an annular spring and presses the slotted adapter sleeve on the shaft. The internal clearance of bearings can also be adjusted via the adapter sleeve at the same time. A hook wrench is used for the process of clamping.
Bearing insert / Radial insert ball bearing
Adapter sleeve
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.