Flange Housing Unit SBPFT204 as a Set Comprising Bearing Insert SB204 2RS and Flange Housing PFT204 - Shaft: 20 mm
Item number:
SBPFT204-Set
Item features:
The housing bearing unit SBPFT204 as a set includes the 3-hole flange housing PFT204 and the single row radial insert ball bearing SB204-2RS (shaft: 20 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. With its sheet steel housing it is suitable for space-saving installations.
Set Components
Technical Data
Inside Ø (mm): | 20 |
Tolerance for inside-Ø (mm): | 0,018/0 |
Housing Type: | 3 hole flanged housing unit |
Shaft Fastening: | Grub Screws |
Number of Mounting Holes: | 3 |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Housing Material: | galvanized Sheet Steel |
Cage Material: | Sheet Steel |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Recommended tightening torque for shaft fastener (Nm): | 5 |
Bearing No.: | SB 204 |
Housing No.: | PFT 204 |
Grub Screw: | M6 |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Norm: | DIN 626-2 |
Item weight: | 0,24 kg |
Features
Flange housing
- the design as a 3-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- low weight
- with extended inner ring and grub screws (pre-assembled) for fastening the inner ring on a shaft
- smooth running and good behavior in case of tilting due to the extended inner ring
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- lubricated for life; under normal operating conditions, relubrication is not necessary
Bearing insert / Radial insert ball bearing
The bearing insert is comparable with YAT204 (SKF), UB204 (NSK), AS204 (NTN), GAY20 (FAG).
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.