Englisch
Deutsch
Flange Housing Unit SAPF201 as a Set Comprising Bearing Insert SA201 2RS and Flange Housing PF203 - Shaft: 12 mm
Item number:
SAPF201-Set
Item features:
The housing bearing unit SAPF201 as a set includes the round 3-hole flange housing PF203 and the single row radial insert ball bearing SA201-2RS (shaft: 12 mm). The set components are coordinated with each other so that they can be mounted directly. The set is suitable for high radial loads. With its sheet steel housing it is suitable for space-saving installations.
Set Components
Technical Data
| Inside Ø (mm): | 12 |
| Housing Type: | 3 hole flanged housing unit |
| Extended Inner Ring: | one side |
| Shaft Fastening: | Eccentric Collar |
| Number of Mounting Holes: | 3 |
| Seal: | 2RS |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Housing Material: | galvanized Sheet Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | greased |
| Lifetime lubricated: | yes |
| Recommended tightening torque for shaft fastener (Nm): | 5 |
| Bearing No.: | SA 201-2RS |
| Housing No.: | PF 203 |
| Grub Screw: | M6 |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -20°C |
| Magnetic: | yes |
| Norm: | DIN 626-1 |
| Item weight: | 0,26 kg |
Features
Flange housing
- the design as a round 3-hole flange bearing allows installation in a variety of applications, even with limited space at the installation site and is suitable for high radial loads
- the housing is made of sheet steel and is thus suitable for space-saving installations
- increased corrosion resistance due to galvanized sheet steel
- low weight
- is fastened with eccentric ring and grub screws on the shaft
- suitable for high speeds with the same direction of rotation
- the compensation of static misalignments is possible up to an angle of 5° due to the spherical outer surface of the outer ring
- two-piece sealing system: with sheet steel washer reinforced rubber seal inside; outside additionally with upstream slinger made of sheet steel for high mechanical protection against foreign matter
- lubricated for life; under normal operating conditions, relubrication is not necessary
Bearing insert / Radial insert ball bearing
The bearing insert is comparable with YET201 (SKF), GRAE12 (FAG), 16201, EN201 (NSK), AEL201 (NTN).
In addition to this set, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.