Englisch
Deutsch
Drawn Cup Needle Roller Bearing HK 1012 RS / HK1012 RS (1-side lip sealed) 10x14x12 mm
Item number:
HK1012-RS
Item features:
The needle sleeve HK1012-RS is a small needle roller bearing without inner ring and can be placed directly on the shaft. It is suitable for absorbing high radial forces in the smallest space. Main dimensions according to DIN 618-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 10 |
| Outside Ø (mm): | 14 |
| Width (mm): | 12 |
| Tolerance for width (mm): | 0/-0,3 |
| Seal: | RS |
| Inner Ring: | no |
| Cage Material: | Sheet Steel |
| Magnetic: | yes |
| Norm: | DIN 618 |
| Ring Material: | Steel |
| Type of lubrication: | oiled |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| Rolling Element Material: | Rolling Bearing Steel |
| min. Operating Temperature: | -40°C |
| Item weight: | 4 g |
Features
- the drawn cup needle roller bearing is a needle roller bearing with chipless manufactured thin-walled outer rings
- open on both sides
- extremely low section height and the high load carrying capacity
- can be used if the surface of the shaft is suitable as a raceway
- seal: contact lip seal on one side made of rubber (RS) for high sealing effect
- suitable if the housing bores cannot be designed as raceways for needle roller and cage assemblies
- for particularly space-saving and economical arrangements
- easy to install, can be simply pressed into the housing bore and require no further axial fixation
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.