Double Direction Axial Deep Groove Ball Bearings of the series 523

Special feature of this series: Main dimensions according to DIN 711. Double direction axial deep groove ball bearings of the series 523 are suitable for very high axial loads in both directions. They withstand higher loads than axial deep groove ball bearings of the series 522 with the same inner diameter and are dismountable.

Datatable

Items 1 - 2 of 2

Reset all filters

Double Direction Axial Deep Groove Ball Bearing 52324...

Image may differ.

Double Direction Axial Deep Groove Ball Bearing 52324 100x210x123 mm

Item number: 52324

Item features:

Delivery time: Available

from 4 pcs per 618,95 €
from 10 pcs per 605,20 €
from 50 pcs per 591,44 €
from 200 pcs per 577,69 €
from 1000 pcs per 563,93 €

687,72 € *

incl. 19% VAT , (Standard)

Double Direction Axial Deep Groove Ball Bearing 52324-M...

Image may differ.

Double Direction Axial Deep Groove Ball Bearing 52324-M 100x210x123 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 742,74 €
from 10 pcs per 726,23 €
from 50 pcs per 709,73 €
from 200 pcs per 693,22 €
from 1000 pcs per 676,72 €

825,27 € *

incl. 19% VAT , (Standard)

Items 1 - 2 of 2

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.