Englisch
Deutsch
Double Direction Axial Deep Groove Ball Bearing 52217 70x125x55 mm
Item number: 52217
Item features:
For forces in the shaft direction. The thrust bearing 52217 absorbs high loads from both axial directions and can be dismantled. Main dimensions according to DIN 711.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 70 |
| Inside Ø Shaft Washer (mm): | 70 |
| Inside Ø Housing Washer (mm): | 88 |
| Outside Ø (mm): | 125 |
| Outside Ø Housing Washer (mm): | 125 |
| Width (mm): | 55 |
| Tolerance for inside-Ø (mm): | 0/-0,015 |
| Tolerance for outside-Ø (mm): | 0/-0,025 |
| Tolerance for width (mm): | 0,02/-0,3 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | oiled |
| Lifetime lubricated: | no |
| Tolerance Class: | ABEC 1 / P0 |
| max. Operating Temperature: | +150°C |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 711 |
| Item weight: | 2,23 kg |
Features
- double direction design
- consists of shaft washers, flat housing locating washers and ball-cage assemblies
- suitable for high axial loads in both directions
- can be dismantled, the bearing washers and the ball cage assemblies can be mounted separately
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)