Deep Groove Ball Bearings of the series CE-60 (Full Ceramic)

Special feature of this series: Full ceramic deep groove ball bearings of the CE-60 series have smaller dimensions than full ceramic deep groove ball bearings of the CE62 series at the same inside diameter and they are lighter. They can still support moderate radial loads despite their low weight. Compared to deep groove ball bearings of the 63 series they require a smaller installation space at the same inside diameter, only weigh half of them and allow higher speeds. By using ceramic as a material for rings and rolling elements, they have a number of advantageous properties. They are lighter than comparable deep groove ball bearings made of bearing steel, wear-resistant, non-conductive, durable, corrosion-resistant, chemical-resistant and are characterized by high hardness and rigidity. They are available with cages of high temperature resistant (PEEK) or chemical resistant plastic (PTFE).

Datatable

Items 1 - 6 of 6

Reset all filters

Full Ceramic Deep Groove Ball Bearing CE6000 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6000 Si3N4 PTFE open 10x26x8 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 22,66 €
from 10 pcs per 21,40 €
from 50 pcs per 20,13 €
from 200 pcs per 18,87 €
from 1000 pcs per 17,62 €

25,17 € *

incl. 19% VAT , plus (Briefversand)

Full Ceramic Deep Groove Ball Bearing CE6002 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6002 Si3N4 PTFE open 15x32x9 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 26,43 €
from 10 pcs per 24,97 €
from 50 pcs per 23,49 €
from 200 pcs per 22,03 €
from 1000 pcs per 20,56 €

29,37 € *

incl. 19% VAT , plus (Briefversand)

Full Ceramic Deep Groove Ball Bearing CE6003 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6003 Si3N4 PTFE open 17x35x10 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,67 €
from 10 pcs per 28,02 €
from 50 pcs per 26,37 €
from 200 pcs per 24,73 €
from 1000 pcs per 23,07 €

32,96 € *

incl. 19% VAT , plus (Briefversand)

Full Ceramic Deep Groove Ball Bearing CE6004 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6004 Si3N4 PTFE open 20x42x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 37,75 €
from 10 pcs per 35,64 €
from 50 pcs per 33,55 €
from 200 pcs per 31,45 €
from 1000 pcs per 29,36 €

41,94 € *

incl. 19% VAT , plus (Briefversand)

Full Ceramic Deep Groove Ball Bearing CE6005 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6005 Si3N4 PTFE open 25x47x12 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 43,11 €
from 10 pcs per 40,72 €
from 50 pcs per 38,33 €
from 200 pcs per 35,94 €
from 1000 pcs per 33,53 €

47,91 € *

incl. 19% VAT , plus (Briefversand)

Full Ceramic Deep Groove Ball Bearing CE6006 Si3N4 PTFE...

Image may differ.

Full Ceramic Deep Groove Ball Bearing CE6006 Si3N4 PTFE open 30x55x13 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 69,01 €
from 10 pcs per 65,18 €
from 50 pcs per 61,33 €
from 200 pcs per 57,50 €
from 1000 pcs per 53,67 €

76,67 € *

incl. 19% VAT , (Briefversand)

Items 1 - 6 of 6

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used

Some materials used for rolling bearings are magnetic.