Deep Groove Ball Bearing 6709 / 61709 ZZ / 2Z 45x55x6 mm
Item number: 6709-ZZ
Extremely narrow, extremely light and with utmost good spinning characteristics. The deep groove ball bearing 6709-ZZ / 2Z is extremely narrow and can also be used with limited space. The low weight allows for utmost high speeds.
|Inside Ø (mm):||45|
|Outside Ø (mm):||55|
|Tolerance for inside-Ø (mm):||0/-0,012|
|Tolerance for outside-Ø (mm):||0/-0,013|
|Tolerance for width (mm):||0/-0,12|
|Internal Clearance:||CN (Standard)|
|Slot and Snap Ring:||no|
|Ring Material:||Rolling Bearing Steel|
|Rolling Element Material:||Rolling Bearing Steel|
|Cage Material:||Sheet Steel|
|Sealing material:||Sheet Steel|
|Full Complement Ball Set:||no|
|Rows of Rolling Elements:||single row|
|Tolerance Class:||ABEC 1 / P0|
|Noise and vibration testing:||Class V|
|Type of lubrication:||greased|
|Item weight:||25 g|
- thin section bearing with ultra-thin cross section
- suitable for space-saving installation in radial and axial directions
- suitable for extremely high speeds compared to deep groove ball bearings with a larger cross section
- extra light series with compact dimensions and low weight
- suitable for radial loads and light axial loads in both directions
- offers high running accuracy, quiet running and very high speeds
- seal: non-contact gap seal on both sides made of a profiled sheet steel disc (ZZ / 2Z) for higher speeds than with rubber seal
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?