

Deep Groove Ball Bearing 62201 2RS 12x32x14 mm
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 12 |
Outside Ø (mm): | 32 |
Width (mm): | 14 |
Tolerance for inside-Ø (mm): | 0/-0,008 |
Tolerance for outside-Ø (mm): | 0/-0,011 |
Tolerance for width (mm): | 0/-0,12 |
Bore: | cylindrical |
Extended Inner Ring: | no |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
min. Operating Temperature: | -20°C |
Tolerance Class: | ABEC 1 / P0 |
Internal Clearance: | CN (Standard) |
Seal: | 2RS |
Ring Material: | Rolling Bearing Steel |
Rolling Element Material: | Rolling Bearing Steel |
Cage Material: | Sheet Steel |
Sealing material: | NBR |
Seal Colour: | Black |
Type of lubrication: | greased |
Lifetime lubricated: | yes |
Magnetic: | yes |
Noise and vibration testing: | Class V |
Norm: | DIN 625-1 |
Item weight: | 45 g |
Features
- wider than comparable deep groove ball bearings of the series 62
- light series with compact dimensions and low weight
- can carry relatively high radial loads despite low weight
- suitable for high radial loads and light axial loads in both directions
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?