Englisch
Deutsch
Deep Groove Ball Bearing 6004 open oiled 20x42x12 mm
Item number:
6004-OIL
Item features:
Lightweight, stable and with good spinning characteristics. The deep groove ball bearing 6004 is a true all-rounder and, due to its balanced properties, it is suitable for a variety of applications. Main dimensions according to DIN 625-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 20 |
| Outside Ø (mm): | 42 |
| Width (mm): | 12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Tolerance for inside-Ø (mm): | 0/-0,01 |
| Tolerance for outside-Ø (mm): | 0/-0,011 |
| Tolerance for width (mm): | 0/-0,12 |
| Seal: | open |
| Sealing material: | without |
| Noise and vibration testing: | Class V |
| Cage Material: | Sheet Steel |
| Internal Clearance: | CN (Standard) |
| Lifetime lubricated: | no |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Ring Material: | Rolling Bearing Steel |
| Type of lubrication: | oiled |
| Tolerance Class: | ABEC 1 / P0 |
| max. Operating Temperature: | +120°C |
| Rolling Element Material: | Rolling Bearing Steel |
| min. Operating Temperature: | -40°C |
| Item weight: | 69 g |
Features
- extra light series with compact dimensions and low weight
- suitable for high radial loads and light axial loads in both directions
- seal: open (without seal); for higher speeds than with sealed ball bearings and easy relubrication
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?