Englisch
Deutsch
Hybrid (Ceramics, Stainless Steel) Miniature Deep Groove Ball Bearing SS HC 635 2RS TN dry 5x19x6 mm
Item number:
SS-HC-635-2RS-TN-DRY
Item features:
The hybrid miniature ball bearing SS-HC-635-2RS-TN has excellent properties due to the ceramic rolling elements. It is small and suitable for installation with limited space and on thin shafts. Main dimensions according to DIN 625-1.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 5 |
| Outside Ø (mm): | 19 |
| Width (mm): | 6 |
| Tolerance for inside-Ø (mm): | 0/-0,008 |
| Tolerance for outside-Ø (mm): | 0/-0,009 |
| Tolerance for width (mm): | 0/-0,12 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Seal: | 2RS |
| Sealing material: | NBR |
| Ring Material: | Stainless Steel |
| Rolling Element Material: | Ceramics |
| Cage Material: | Plastic |
| Type of lubrication: | dry |
| Lifetime lubricated: | no |
| Seal Colour: | Blue |
| Tolerance Class: | ABEC 1 / P0 |
| Noise and vibration testing: | Class V |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 625-1 |
| Item weight: | 1 g |
Features
- designed as hybrid miniature ball bearing: rolling elements made of ceramic, inner and outer ring made of stainless steel
- lighter than comparable miniature ball bearings with steel balls as rolling elements; ceramic balls have a current-insulating effect; has a high wear resistance
- miniature ball bearing with smallest dimensions
- suitable for high radial loads and light axial loads in both directions
- suitable for high running accuracy and quiet running
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- seal: contact lip seal on both sides made of rubber (2RS) for high sealing effect
- If you need this bearing in RS design with only one seal and one open side, you can simply remove one of the two seals: to the instructions
- good fixed bearing property, but can also be used as a floating bearing, each in both directions
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)
Further Information
- What does radial and axial load capacity mean?
- Fit recommendations for mounting
- Info sheet ball bearing
- Information about ball bearing seals
- Internal clearance and operating clearance
- Comparison list of roller bearings
- Comparison of features of roller bearings
- How do I clean my bearings?
- How do I grease or oil my bearings?
- How do I remove a sealing washer or cover plate?