Englisch
Deutsch
Axial Needle Roller and Cage Assembly AXK0619 TN 6x19x2 mm
Item number:
AXK0619-TN
Item features:
The axial needle roller bearing AXK0619-TN is suitable for high axial loads in the smallest space. It can be combined with a thrust washer. Main dimensions according to DIN 5405-2.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 6 |
| Outside Ø (mm): | 19 |
| Width (mm): | 2 |
| Tolerance for inside-Ø (mm): | 0,00002/0,00014 |
| Tolerance for outside-Ø (mm): | -0,00032/-0,00011 |
| Tolerance for width (mm): | -0,00001/0 |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Plastic |
| Type of lubrication: | oiled |
| max. Operating Temperature: | +100°C (briefly up to +120°C) |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 5405-2 |
| Item weight: | 1 g |
Features
- it consists of an axial cage assembly with integrated needle rollers
- it has a very low axial section height
- it has the capacity of supporting high axial forces in one direction
- the prerequisite for the use of the axial needle roller and cage assembly are hardened and ground running surfaces which can be used as a raceway
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.