Axial Needle Roller and Cage Assembly AXK0515 TN 5x15x2 mm
Item number:
AXK0515-TN
Item features:
The axial needle roller bearing AXK0515-TN is suitable for high axial loads in the smallest space. It can be combined with a thrust washer. Main dimensions according to DIN 5405-2.
Technical ScribbleZoomable
Technical Data
Inside Ø (mm): | 5 |
Outside Ø (mm): | 15 |
Width (mm): | 2 |
Cage Material: | Plastic |
Rolling Element Material: | Rolling Bearing Steel |
Magnetic: | yes |
Type of lubrication: | oiled |
Norm: | DIN 5405-2 |
Tolerance for width (mm): | -0,00001/0 |
Tolerance for outside-Ø (mm): | -0,000275/-0,000095 |
min. Operating Temperature: | -40°C |
max. Operating Temperature: | +100°C (briefly up to +120°C) |
Tolerance for inside-Ø (mm): | 0,00002/0,00014 |
Item weight: | 0,6 g |
Features
- it consists of an axial cage assembly with integrated needle rollers
- it has a very low axial section height
- it has the capacity of supporting high axial forces in one direction
- the prerequisite for the use of the axial needle roller and cage assembly are hardened and ground running surfaces which can be used as a raceway
- cage material: plastic; the low weight and the elasticity of the plastic have a positive effect on the sliding and emergency running properties as well as the shock resistance; suitable for quiet running
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.