Axial deep groove ball bearings — for loads in the shaft direction

Axial deep groove ball bearings are designed to withstand heavy loads in the direction of the shaft. Depending on the bearing design, the load can occur from one or both sides. Axial ball bearings are fundamentally different in design than radial bearings, consist of ball rings, housing washers, shaft washers and can be dismantled.

Features of this series

Main dimensions according to DIN 711. Thrust bearings are designed for great axial loads, but mustn´t be subjected to radial loads. They consist of ball-cage assemblies, shaft locating washers and flat housing locating washers.

Single direction: Usable in case of great axial loads in one direction
Double direction: Usable in case of great axial loads in both directions

Material description of thrust bearings

Thrust bearings made of rolling bearing steel: are cost-effective and can withstand very high loads. The bearing steel is wear-resistant, shock-resistant, conductive and magnetic.
Thrust bearings made of stainless steel: are hygienic, corrosion-resistant, magnetic and can withstand high loads.

Datatable

Items 1 - 4 of 4

Reset all filters

Axial Deep Groove Ball Bearing 51132 160x200x31 mm

Image may differ.

Axial Deep Groove Ball Bearing 51132 160x200x31 mm

Item number: 51132

Item features:

Delivery time: Available

from 4 pcs per 56,23 €
from 10 pcs per 54,98 €
from 50 pcs per 53,73 €
from 200 pcs per 52,48 €
from 1000 pcs per 51,23 €

62,48 € *

incl. 19% VAT , (Standard)

Axial Deep Groove Ball Bearing 51132-M 160x200x31 mm

Image may differ.

Axial Deep Groove Ball Bearing 51132-M 160x200x31 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 67,47 €
from 10 pcs per 65,97 €
from 50 pcs per 64,47 €
from 200 pcs per 62,97 €
from 1000 pcs per 61,48 €

74,97 € *

incl. 19% VAT , (Standard)

Axial Deep Groove Ball Bearing 51232 160x225x51 mm

Image may differ.

Axial Deep Groove Ball Bearing 51232 160x225x51 mm

Item number: 51232

Item features:

Delivery time: Available

from 4 pcs per 146,07 €
from 10 pcs per 142,82 €
from 50 pcs per 139,59 €
from 200 pcs per 136,34 €
from 1000 pcs per 133,09 €

162,30 € *

incl. 19% VAT , (Standard)

Axial Deep Groove Ball Bearing 51232-M 160x225x51 mm

Image may differ.

Axial Deep Groove Ball Bearing 51232-M 160x225x51 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 175,29 €
from 10 pcs per 171,40 €
from 50 pcs per 167,49 €
from 200 pcs per 163,60 €
from 1000 pcs per 159,71 €

194,76 € *

incl. 19% VAT , (Standard)

Items 1 - 4 of 4

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.