Axial Deep Groove Ball Bearings of the series SS511 (Stainless Steel)

Special feature of this series: Main dimensions according to DIN 711. Stainless steel axial deep groove ball bearings of the series SS511 are corrosion resistant and suitable for relatively high high axial loads in one direction. They have smaller dimensions than axial deep groove ball bearings of the series 512 with the same inner diameter and are dismountable.

Datatable

Items 1 - 1 of 1

Reset all filters

Stainless Steel Axial Deep Groove Ball Bearing SS 51115...

Image may differ.

Stainless Steel Axial Deep Groove Ball Bearing SS 51115 75x100x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 42,72 €
from 10 pcs per 41,77 €
from 50 pcs per 40,83 €
from 200 pcs per 39,88 €
from 1000 pcs per 38,92 €

47,47 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 1 of 1

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.