Axial Deep Groove Ball Bearings 532-U

Special feature of this series: Main dimensions according to DIN 711. Axial deep groove ball bearings of the series 532-U are suitable for high axial loads in one direction. Because of the washer, the axial ball bearings are angularly movable, so they can compensate for misalignment. They have comparable sizes to the series 512 and are dismountable.

Datatable

Items 1 - 1 of 1

Reset all filters

Axial Deep Groove Ball Bearing 53205-U 25x50x19 mm

Image may differ.

Axial Deep Groove Ball Bearing 53205-U 25x50x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 15,96 €
from 10 pcs per 15,32 €
from 50 pcs per 14,90 €
from 200 pcs per 14,26 €
from 1000 pcs per 13,83 €

21,28 € *

incl. 19% VAT , plus (Briefversand)

Items 1 - 1 of 1

FILTER

Reset all filters

Special design of the ball bearing

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.