Englisch
Deutsch
Axial Deep Groove Ball Bearing 51116 80x105x19 mm
Item number: 51116
Item features:
For forces in the shaft direction. The thrust bearing 51116 absorbs loads from an axial direction and can be dismantled. Main dimensions according to DIN 711.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 80 |
| Inside Ø Shaft Washer (mm): | 80 |
| Inside Ø Housing Washer (mm): | 82 |
| Outside Ø (mm): | 105 |
| Outside Ø Housing Washer (mm): | 105 |
| Width (mm): | 19 |
| Tolerance for inside-Ø (mm): | 0/-0,015 |
| Tolerance for outside-Ø (mm): | 0/-0,022 |
| Tolerance for width (mm): | 0,02/-0,3 |
| Bore: | cylindrical |
| Extended Inner Ring: | no |
| Ring Material: | Rolling Bearing Steel |
| Rolling Element Material: | Rolling Bearing Steel |
| Cage Material: | Sheet Steel |
| Type of lubrication: | oiled |
| Lifetime lubricated: | no |
| Tolerance Class: | ABEC 1 / P0 |
| max. Operating Temperature: | +150°C |
| min. Operating Temperature: | -40°C |
| Magnetic: | yes |
| Norm: | DIN 711 |
| Item weight: | 0,38 kg |
Features
- consists of a shaft washer, a spherical housing washer and a ball cage assembly
- suitable for relatively high axial loads in one direction
- cage material: sheet steel, high load-bearing capacity and high strength; suitable for continuous high temperatures
- can be dismantled, the bearing washers and the ball cage assembly can be mounted separately
- manufacturers of bearings, such as FAG, KOYO, NSK, SKF, SNR, etc. assign different suffixes for their characteristics, for better orientation take note of the comparison table of bearings (see further information)