Englisch
Deutsch
Adapter Sleeve H215 65x98x43 mm
Item number: H215
The adapter sleeve H215 allows the assembly and fine adjustment of a rolling bearing with a tapered bore on a shaft.
Technical ScribbleZoomable
Technical Data
| Inside Ø (mm): | 65 |
| Outside Ø (mm): | 98 |
| Width (mm): | 43 |
| For Shaft Bore (mm): | 75 |
| max. Operating Temperature: | +150°C |
| min. Operating Temperature: | -30°C |
| Norm: | DIN 5415 |
| Item weight: | 0,66 kg |
Features
- serves for fixing of bearings with a tapered bore on a shaft
- consists of a tapered metal sleeve, a tab washer and a locknut
- Upon fixing a bearing with the help of an adapter sleeve the inner ring of the bearing takes over the function of an annular spring and presses the slotted adapter sleeve on the shaft. The internal clearance of bearings can also be adjusted via the adapter sleeve at the same time. A hook wrench is used for the process of clamping.
- the adapter sleeve of the series H2 is thinner than adapter sleeves of the H3 and H23 series at the same inside diameter
- In addition to this article, we can also offer bearings of the brands FAG, KOYO, NSK, SKF, SNR, etc. on request.
Complimentary Items
For Adapter Sleeve matching items