Innen-Ø (mm): 9.52

Image may differ.

Miniature Deep Groove Ball Bearing Inch R1038 2RS 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R1038 open oiled 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,15 €
from 10 pcs per 1,08 €
from 50 pcs per 1,02 €
from 200 pcs per 0,99 €
from 1000 pcs per 0,96 €

1,66 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R1038 ZZ / 2Z 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Stainless Steel Miniature Deep Groove Ball Bearing Inch SS R1038 open dry 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,69 €
from 10 pcs per 3,49 €
from 50 pcs per 3,27 €
from 200 pcs per 3,07 €
from 1000 pcs per 2,87 €

4,10 €

incl. 19% VAT , plus

Image may differ.

Stainless Steel Miniature Deep Groove Ball Bearing Inch SS R1038 open oiled 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,69 €
from 10 pcs per 3,49 €
from 50 pcs per 3,27 €
from 200 pcs per 3,07 €
from 1000 pcs per 2,87 €

4,10 €

incl. 19% VAT , plus

Image may differ.

Stainless Steel Miniature Deep Groove Ball Bearing Inch SS R1038 ZZ / 2Z 9.52 x 15.87 x 3.96 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,42 €
from 10 pcs per 3,22 €
from 50 pcs per 3,03 €
from 200 pcs per 2,84 €
from 1000 pcs per 2,65 €

3,80 €

incl. 19% VAT , plus

Image may differ.

Radial Shaft Seal BA 9.52x22.22x6.35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,46 €
from 10 pcs per 3,28 €
from 50 pcs per 3,21 €
from 200 pcs per 3,07 €
from 500 pcs per 2,92 €

3,65 €

incl. 19% VAT , plus

Radial Shaft Seal BASL 9.52x19.05x6.35 mm

Image may differ.

Radial Shaft Seal BASL 9.52x19.05x6.35 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 3,14 €
from 10 pcs per 2,98 €
from 50 pcs per 2,92 €
from 200 pcs per 2,78 €
from 500 pcs per 2,64 €

3,31 €

incl. 19% VAT , plus

Items 1 - 8 of 8

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

an extended inner ring is wider than the outer ring of the article

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Filters and sort order