Außen-Ø (mm): 72

Image may differ.

Self-Aligning Ball Bearing (Extended Inner Ring) 11207 35x72x17 mm

Item number: 11207

Item features:

Delivery time: Available

from 4 pcs per 20,37 €
from 10 pcs per 19,30 €
from 50 pcs per 18,86 €
from 200 pcs per 18,02 €
from 500 pcs per 17,15 €

21,44 €

incl. 19% VAT , plus

Image may differ.

Self Aligning Ball Bearing (Extended Inner Ring) 11207 TN 35x72x17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 20,37 €
from 10 pcs per 19,30 €
from 50 pcs per 18,86 €
from 200 pcs per 18,02 €
from 500 pcs per 17,15 €

21,44 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1207 35x72x17 mm

Item number: 1207

Item features:

Delivery time: Available

from 4 pcs per 10,69 €
from 10 pcs per 10,13 €
from 50 pcs per 9,90 €
from 200 pcs per 9,45 €
from 500 pcs per 9,00 €

11,25 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1207 K (tapered) 35x72x17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,69 €
from 10 pcs per 10,13 €
from 50 pcs per 9,90 €
from 200 pcs per 9,45 €
from 500 pcs per 9,00 €

11,25 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1207 K (tapered) TN 35x72x17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,69 €
from 10 pcs per 10,13 €
from 50 pcs per 9,90 €
from 200 pcs per 9,45 €
from 500 pcs per 9,00 €

11,25 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1207 TN 35x72x17 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 10,69 €
from 10 pcs per 10,13 €
from 50 pcs per 9,90 €
from 200 pcs per 9,45 €
from 500 pcs per 9,00 €

11,25 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1306 30x72x19 mm

Item number: 1306

Item features:

Delivery time: Available

from 4 pcs per 8,82 €
from 10 pcs per 8,35 €
from 50 pcs per 8,16 €
from 200 pcs per 7,79 €
from 500 pcs per 7,43 €

9,28 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1306 K (tapered) 30x72x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,82 €
from 10 pcs per 8,35 €
from 50 pcs per 8,16 €
from 200 pcs per 7,79 €
from 500 pcs per 7,43 €

9,28 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1306 K (tapered) TN 30x72x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,82 €
from 10 pcs per 8,35 €
from 50 pcs per 8,16 €
from 200 pcs per 7,79 €
from 500 pcs per 7,43 €

9,28 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1306 TN 30x72x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 8,82 €
from 10 pcs per 8,35 €
from 50 pcs per 8,16 €
from 200 pcs per 7,79 €
from 500 pcs per 7,43 €

9,28 €

incl. 19% VAT , plus

Items 1 - 10 of 310

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Special design of the ball bearing

With protective housing caps: a shaft is inserted through the open protective housing caps, the closed ones seal the housing completely. for cylindrical roller bearings: design of the inner and outer rings with regard to axial displacement

Bore design, either cylindrical or tapered (1:12)

the way, the shaft is fixed with the bearing insert.

Profile shape of the outer ring of track rollers

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Some sprag clutches have grooves in which feather keys can be used for positive torque transmission.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Lubricant used in a rolling bearing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

thread size of the fastening screw for the shaft tightening

Filters and sort order