Innen-Ø (mm): 6.35

Image may differ.

Yoke Type Track Roller CRY12V 6.35x19.05x14.287 mm

Item number: CRY12V

Item features:

Delivery time: Available

from 4 pcs per 7,25 €
from 10 pcs per 6,64 €
from 50 pcs per 6,13 €
from 200 pcs per 5,78 €
from 500 pcs per 5,44 €

8,63 €

incl. 19% VAT , plus

Image may differ.

Yoke Type Track Roller CRY12VUU 6.35x19.05x14.287 mm

Item number: CRY12VUU

Item features:

Delivery time: Available

from 4 pcs per 7,20 €
from 10 pcs per 6,59 €
from 50 pcs per 6,08 €
from 200 pcs per 5,74 €
from 500 pcs per 5,40 €

8,57 €

incl. 19% VAT , plus

Image may differ.

Yoke Type Track Roller CRY14VUU 6.35x22.23x14.29 mm

Item number: CRY14VUU

Item features:

Delivery time: Available

from 4 pcs per 7,50 €
from 10 pcs per 6,88 €
from 50 pcs per 6,34 €
from 200 pcs per 5,99 €
from 500 pcs per 5,63 €

8,93 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R168 2RS 6.35 x 9.525 x 3.175 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R168 ZZ / 2Z 6.35 x 9.525 x 3.175 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R168 ZZ / 2Z TN 6.35 x 9.525 x 3.175 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,14 €
from 10 pcs per 1,06 €
from 50 pcs per 1,01 €
from 200 pcs per 0,98 €
from 1000 pcs per 0,95 €

1,63 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R188 W3.175 open oiled 6.35 x 12.7 x 3.175 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R188 ZZ / 2Z 6.35 x 12.7 x 4.7624 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 1,07 €
from 10 pcs per 1,00 €
from 50 pcs per 0,95 €
from 200 pcs per 0,92 €
from 1000 pcs per 0,89 €

1,54 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R4 2RS 6.35 x 15.875 x 4.978 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 0,81 €
from 10 pcs per 0,75 €
from 50 pcs per 0,71 €
from 200 pcs per 0,69 €
from 1000 pcs per 0,67 €

1,15 €

incl. 19% VAT , plus

Image may differ.

Miniature Deep Groove Ball Bearing Inch R4 open oiled 6.35 x 15.875 x 4.978 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 0,87 €
from 10 pcs per 0,81 €
from 50 pcs per 0,77 €
from 200 pcs per 0,75 €
from 1000 pcs per 0,71 €

1,24 €

incl. 19% VAT , plus

Items 1 - 10 of 37

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Lubricant used in a rolling bearing

Filters and sort order