Außen-Ø (mm): 22.23

Image may differ.

Yoke Type Track Roller CRY14VUU 6.35x22.23x14.29 mm

Item number: CRY14VUU

Item features:

Delivery time: Available

from 4 pcs per 7,50 €
from 10 pcs per 6,88 €
from 50 pcs per 6,34 €
from 200 pcs per 5,99 €
from 500 pcs per 5,63 €

8,93 €

incl. 19% VAT , plus

Image may differ.

Radial-Spherical Plain Bearing - Requiring Maintenance - Inch - GEZ12ES open 12.7x22.23x11.1 mm

Item number: GEZ12ES

Delivery time: Available

from 4 pcs per 4,43 €
from 10 pcs per 4,19 €
from 50 pcs per 4,11 €
from 200 pcs per 3,92 €
from 500 pcs per 3,83 €

4,66 €

incl. 19% VAT , plus

Items 1 - 2 of 2

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Type of sealing of the bearing to protect it from contamination

There are maintenance-free and maintenance-requiring plain bearings. The plain bearings that require maintenance must be regularly relubricated.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material combination of the sliding pair

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Filters and sort order