Außen-Ø (mm): 140

Image may differ.

Self-Aligning Ball Bearing 1216 80x140x26 mm

Item number: 1216

Item features:

Delivery time: Available

from 4 pcs per 51,38 €
from 10 pcs per 48,68 €
from 50 pcs per 47,60 €
from 200 pcs per 45,43 €
from 500 pcs per 43,27 €

54,09 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 1216 K (tapered) 80x140x26 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 51,38 €
from 10 pcs per 48,68 €
from 50 pcs per 47,60 €
from 200 pcs per 45,43 €
from 500 pcs per 43,27 €

54,09 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 1216 K (tapered) TN 80x140x26 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 51,38 €
from 10 pcs per 48,68 €
from 50 pcs per 47,60 €
from 200 pcs per 45,43 €
from 500 pcs per 43,27 €

54,09 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 1216 TN 80x140x26 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 51,38 €
from 10 pcs per 48,68 €
from 50 pcs per 47,60 €
from 200 pcs per 45,43 €
from 500 pcs per 43,27 €

54,09 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 1313 65x140x33 mm

Item number: 1313

Item features:

Delivery time: Available

from 4 pcs per 29,39 €
from 10 pcs per 27,85 €
from 50 pcs per 27,23 €
from 200 pcs per 25,99 €
from 500 pcs per 24,75 €

30,94 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1313 K (tapered) 65x140x33 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,39 €
from 10 pcs per 27,85 €
from 50 pcs per 27,23 €
from 200 pcs per 25,99 €
from 500 pcs per 24,75 €

30,94 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1313 K (tapered) TN 65x140x33 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,39 €
from 10 pcs per 27,85 €
from 50 pcs per 27,23 €
from 200 pcs per 25,99 €
from 500 pcs per 24,75 €

30,94 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 1313 TN 65x140x33 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 29,39 €
from 10 pcs per 27,85 €
from 50 pcs per 27,23 €
from 200 pcs per 25,99 €
from 500 pcs per 24,75 €

30,94 €

incl. 19% VAT , plus

Image may differ.

Deep Groove Ball Bearing 16018 open oiled 90x140x16 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 13,14 €
from 10 pcs per 12,85 €
from 50 pcs per 12,55 €
from 200 pcs per 12,27 €
from 1000 pcs per 11,97 €

14,60 €

incl. 19% VAT , plus

Image may differ.

Spherical Roller Bearing 21313 CA W33 65x140x33 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 77,48 €
from 10 pcs per 73,41 €
from 50 pcs per 71,78 €
from 200 pcs per 68,51 €
from 500 pcs per 65,25 €

81,56 €

incl. 19% VAT ,

Items 1 - 10 of 136

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Special design of the ball bearing

With protective housing caps: a shaft is inserted through the open protective housing caps, the closed ones seal the housing completely. for cylindrical roller bearings: design of the inner and outer rings with regard to axial displacement

Bore design, either cylindrical or tapered (1:12)

the way, the shaft is fixed with the bearing insert.

The way in which the spherical plain bearing is fixed to the adjacent construction (welded or bolted)

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

There are maintenance-free and maintenance-requiring plain bearings. The plain bearings that require maintenance must be regularly relubricated.

Bore diameter of the corresponding bearing

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.

Material combination of the sliding pair

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Lubricant used in a rolling bearing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

thread size of the fastening screw for the shaft tightening

Filters and sort order