Innen-Ø (mm): 120

Image may differ.

Self-Aligning Ball Bearing 1224 K (tapered) 120x215x42 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 96,09 €
from 10 pcs per 91,04 €
from 50 pcs per 89,01 €
from 200 pcs per 84,97 €
from 500 pcs per 80,92 €

101,15 €

incl. 19% VAT ,

Image may differ.

Deep Groove Ball Bearing 16024 open oiled 120x180x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 38,25 €
from 10 pcs per 37,39 €
from 50 pcs per 36,54 €
from 200 pcs per 35,70 €
from 1000 pcs per 34,84 €

42,49 €

incl. 19% VAT , plus

Image may differ.

Spherical Roller Bearing 22224 CA K (tapered) W33 120x215x58 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 193,85 €
from 10 pcs per 183,64 €
from 50 pcs per 179,56 €
from 200 pcs per 171,40 €
from 500 pcs per 163,24 €

204,05 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22224 CA W33 120x215x58 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 193,85 €
from 10 pcs per 183,64 €
from 50 pcs per 179,56 €
from 200 pcs per 171,40 €
from 500 pcs per 163,24 €

204,05 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22224 CC K (tapered) W33 120x215x58 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 168,56 €
from 10 pcs per 159,69 €
from 50 pcs per 156,14 €
from 200 pcs per 149,04 €
from 500 pcs per 141,94 €

177,43 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22224 CC W33 120x215x58 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 168,56 €
from 10 pcs per 159,69 €
from 50 pcs per 156,14 €
from 200 pcs per 149,04 €
from 500 pcs per 141,94 €

177,43 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22324 CA K (tapered) W33 120x260x86 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 403,80 €
from 10 pcs per 382,55 €
from 50 pcs per 374,05 €
from 200 pcs per 357,05 €
from 500 pcs per 340,04 €

425,06 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22324 CA W33 120x260x86 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 403,80 €
from 10 pcs per 382,55 €
from 50 pcs per 374,05 €
from 200 pcs per 357,05 €
from 500 pcs per 340,04 €

425,06 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22324 CC K (tapered) W33 120x260x86 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 351,13 €
from 10 pcs per 332,65 €
from 50 pcs per 325,26 €
from 200 pcs per 310,47 €
from 500 pcs per 295,69 €

369,61 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22324 CC W33 120x260x86 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 351,13 €
from 10 pcs per 332,65 €
from 50 pcs per 325,26 €
from 200 pcs per 310,47 €
from 500 pcs per 295,69 €

369,61 €

incl. 19% VAT ,

Items 1 - 10 of 71

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

the way, the shaft is fixed with the bearing insert.

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Article number of the bearing insert for housing bearings

Article number of the housing. The shape and size of the housing can be derived from this

There are maintenance-free and maintenance-requiring plain bearings. The plain bearings that require maintenance must be regularly relubricated.

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the housing is made

Material from which the springs for the backstop are made.

Material combination of the sliding pair

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Area in which the rolling bearing is used

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

thread size of the fastening screw for the shaft tightening

Filters and sort order