Innen-Ø (mm): 110

Image may differ.

Self-Aligning Ball Bearing 1222 110x200x38 mm

Item number: 1222

Item features:

Delivery time: Available

from 4 pcs per 85,47 €
from 10 pcs per 80,97 €
from 50 pcs per 79,17 €
from 200 pcs per 75,57 €
from 500 pcs per 71,97 €

89,96 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 1222 K (tapered) 110x200x38 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 85,47 €
from 10 pcs per 80,97 €
from 50 pcs per 79,17 €
from 200 pcs per 75,57 €
from 500 pcs per 71,97 €

89,96 €

incl. 19% VAT ,

Image may differ.

Deep Groove Ball Bearing 16022 open oiled 110x170x19 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 32,27 €
from 10 pcs per 31,55 €
from 50 pcs per 30,83 €
from 200 pcs per 30,12 €
from 1000 pcs per 29,40 €

35,85 €

incl. 19% VAT , plus

Image may differ.

Self-Aligning Ball Bearing 2222 open 110x200x53 mm

Item number: 2222

Item features:

Delivery time: Available

from 4 pcs per 110,16 €
from 10 pcs per 104,36 €
from 50 pcs per 102,04 €
from 200 pcs per 97,40 €
from 500 pcs per 92,76 €

115,95 €

incl. 19% VAT ,

Image may differ.

Self-Aligning Ball Bearing 2222 K (tapered) open 110x200x53 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 110,16 €
from 10 pcs per 104,36 €
from 50 pcs per 102,04 €
from 200 pcs per 97,40 €
from 500 pcs per 92,76 €

115,95 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22222 CA K (tapered) W33 110x200x53 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 163,29 €
from 10 pcs per 154,70 €
from 50 pcs per 151,26 €
from 200 pcs per 144,38 €
from 500 pcs per 137,50 €

171,88 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22222 CA W33 110x200x53 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 163,29 €
from 10 pcs per 154,70 €
from 50 pcs per 151,26 €
from 200 pcs per 144,38 €
from 500 pcs per 137,50 €

171,88 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22222 CC K (tapered) W33 110x200x53 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 141,99 €
from 10 pcs per 134,52 €
from 50 pcs per 131,53 €
from 200 pcs per 125,55 €
from 500 pcs per 119,57 €

149,46 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22222 CC W33 110x200x53 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 141,99 €
from 10 pcs per 134,52 €
from 50 pcs per 131,53 €
from 200 pcs per 125,55 €
from 500 pcs per 119,57 €

149,46 €

incl. 19% VAT ,

Image may differ.

Spherical Roller Bearing 22322 CA K (tapered) W33 110x240x80 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 348,55 €
from 10 pcs per 330,21 €
from 50 pcs per 322,87 €
from 200 pcs per 308,20 €
from 500 pcs per 293,53 €

366,90 €

incl. 19% VAT ,

Items 1 - 10 of 91

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Plummer Block Housing Units
Flanged Housing Units
Take-up Housing Units

Special design of the ball bearing

With protective housing caps: a shaft is inserted through the open protective housing caps, the closed ones seal the housing completely. for cylindrical roller bearings: design of the inner and outer rings with regard to axial displacement

Bore design, either cylindrical or tapered (1:12)

the way, the shaft is fixed with the bearing insert.

an extended inner ring is wider than the outer ring of the article

needle roller bearings are supplied with or without an inner ring. Needle roller bearings without an inner ring run directly on the shaft, which can save space. For this, there are higher requirements for the quality of shaft (surface, hardness).

Design of the Yoke type track rollers (axial guidance and/or with or without inner ring)

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Article number of the bearing insert for housing bearings

Article number of the housing. The shape and size of the housing can be derived from this

Article number of the bearing insert for split housing bearings

Article number of the adapter sleeve of split housing bearings.

Locating rings are used in split plummer block housings to fix the bearing insert.

There are maintenance-free and maintenance-requiring plain bearings. The plain bearings that require maintenance must be regularly relubricated.

Bore diameter of the corresponding bearing

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the housing is made

Material from which the springs for the backstop are made.

Material combination of the sliding pair

material from which the article is made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Number of holes that can be used to fix the housing

The fastening screw should be tightened with this tightening torque so that the shaft is sufficiently tight.

thread size of the fastening screw for the shaft tightening

Filters and sort order