Außen-Ø (mm): 107.95

Tapered Roller Bearing 543 - 532X 40x107.95x36.512 mm

Image may differ.

Tapered Roller Bearing 543 - 532X 40x107.95x36.512 mm

Item number: 543 - 532X

Item features:

Delivery time: Available

from 4 pcs per 30,87 €
from 10 pcs per 29,25 €
from 50 pcs per 28,60 €
from 200 pcs per 26,64 €
from 500 pcs per 26,00 €

32,50 €

incl. 19% VAT , plus

Image may differ.

Deep Groove Ball Bearing Inch RMS14 open oiled 44.45 x 107.95 x 26.99 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 28,70 €
from 10 pcs per 27,11 €
from 50 pcs per 25,51 €
from 200 pcs per 23,92 €
from 1000 pcs per 22,32 €

31,89 €

incl. 19% VAT , plus

Image may differ.

Radial Shaft Seal BA 88.9x107.95x12.7 mm

Item number:

Item features:

Delivery time: Available

from 4 pcs per 14,04 €
from 10 pcs per 13,30 €
from 50 pcs per 13,01 €
from 200 pcs per 12,41 €
from 500 pcs per 11,83 €

14,78 €

incl. 19% VAT , plus

Items 1 - 3 of 3

FILTER

Reset all filters

Bearings: Geometric structure of the ball bearing VA- and Radial Shaft Seals: Depending on the design, the sealing areas are different

Special design of the ball bearing

Bore design, either cylindrical or tapered (1:12)

an extended inner ring is wider than the outer ring of the article

All radial shaft seals have a sealing lip at the height of tension spring to seal off the liquid. BASL design radial shaft seals have an additional sealing lip on the dry side, which protects against dust and dirt.

Maximum permissible load capacity of the bearing based on the materials used and the geometric design.

Noise level of the bearing during operation.

Smooth-running bearings have low frictional resistance.

Resistance of the materials used in the bearing to water and other corrosive media.

Maximum permissible speed of the bearing.

Protection of the bearing from the ingress of foreign particles and liquids.

Highest ambient temperature at which the bearing can be used without restrictions

Lowest ambient temperature at which the bearing can be used without restrictions

Accuracy of main dimensions (inner diameter, outer diameter and width). P0 is the standard tolerance class, P6 and especially P5 are a bit more precise.

The bearing clearance is the amount by which the two rings of a non-installed roller bearing can be displaced in relation to one another. There are different internal clearance classes. CN is "normal internal clearance" and is the best choice for many applications. C3, C4, ... indicates increased clearance. C2, C1, ... stands for reduced clearance.

Type of sealing of the bearing to protect it from contamination

Inner and outer ring material

Material of the rolling element (i.e. the balls or rollers)

Material of the cage (the cage holds the rolling elements in place)

Material from which the bearing seal is made.

Material from which the springs for the backstop are made.

Type of lubrication of the rolling bearing. Rolling bearings are usually either greased, oiled or dry.

Filters and sort order